Learn more about our product features:
Logo-Memento-(1).png
Nicht für neues Design verwenden

Grablink Express

Framegrabber für 1 PoCL CameraLink-Kamera mit Base-Konfiguration

Im Überblick
  • Für 1 CameraLink-Kamera mit Base-Konfiguration
  • Direkt mit Hunderten von auf dem Markt erhältlichen CameraLink-Kameras kompatibel
  • Unterstützt PoCL (Power over Camera Link)
  • PCIe x1 Bus
  • 32 MB On-Board-Speicher
  • Umfassende Funktionen mit 9 digitalen I/O-Leitungen



Vergleichen Händler


Direkt mit Hunderten von auf dem Markt erhältlichen CameraLink-Kameras kompatibel
Direkt mit Hunderten von auf dem Markt erhältlichen CameraLink-Kameras kompatibel

Sehen Sie sich unsere Seite mit unterstützten Kameras an (im Menü „Support“ unter „Unterstützte Kameras“)


Flexible Zeilenkamera-Anwendung mit einem Rate Converter

  • Der Rate Converter ist ein intelligenter, programmierbarer Frequenzvervielfacher/-teiler.
  • Wird mit Bewegungsencodern und Zeilenkameras verwendet und ermöglicht dem Anwender das Seitenverhältnis der Pixel im Bild auszuwählen.
  • Er bietet eine Möglichkeit, die Erfassungskette so zu kalibrieren, dass problemlos quadratische Pixel (Seitenverhältnis von 1:1) erreicht werden.


Universelle I/O-Leitungen
Universelle I/O-Leitungen

Kompatibel mit einer breiten Palette an Sensoren und Bewegungsencodern.


Treiber für Windows und Linux verfügbar
Treiber für Windows und Linux verfügbar


High-Performance DMA (Direct Memory Access)
High-Performance DMA (Direct Memory Access)

  • Direkte Übertragung in vom Benutzer zugewiesenen Speicher
  • Hardware Scatter-Gather-Unterstützung


Mechanical
Format Standard profile, half length, 1-lane PCI Express card
Cooling method Air-cooling, fanless
Mounting For insertion in a standard height, 1-lane or higher, PCI Express card slot
Connectors
  • 'CAMERA LINK' on bracket:
    • 26-position Mini Delta Ribbon (MDR) socket
    • Camera Link connector
  • 'SYSTEM' on bracket:
    • 26-pin 3-row high-density male sub-D connector
    • I/O lines and power output
  • 'SYSTEM' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'CAMERA POWER INPUT' on module:
    • 4-pin MOLEX power socket
    • 12 VDC power input for PoCL camera
Dimensions PCB L x H: 168 mm x 111 mm, 6.61 in x 4.37 in
Host bus
Standard PCI Express 1.0
Link width 1 lane
Link speed 2.5 GT/s (PCIe 1.0)
DMA 32-bit
Peak delivery bandwidth 256 MB/s
Effective (sustained) delivery bandwidth 180 MB/s (Host PC motherboard dependent)
Power consumption Max. 5.35 W (500 mA @ +3.3V, 300 mA @ +12V), excluding I/O power output
Camera / video inputs
Interface standard(s) Camera Link
Connectors One Mini Delta Ribbon (MDR) Camera Link (CL)
Number of cameras One Base camera
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base
Camera Link clock frequency From 20 MHz up to 85 MHz
PoCL (Power over Camera Link) One PoCL SafePower compliant controller with overload, over-voltage and short-circuit protection
Camera types Grayscale and color (RGB and Bayer) area- and line-scan cameras
Video delivery
Raw video format(s)
  • Monochrome formats: Y8, Y10, Y12, Y14, Y16
  • Packed RGB color formats: RGB24, RGB32
  • Planar RGB color formats: RGB24PL, RGB30PL, RGB36PL, RGB42PL, RGB48PL
  • Additional formats: BAYER8, BAYER10, BAYER12, BAYER14, BAYER16, RAW8, RAW10, RAW12, RAW14, RAW16
On-board processing
On-board memory 32 MB (16 MB for image data)
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
General Purpose Inputs and Outputs
Number of lines 9 I/O lines:
  • 4 TTL input/output lines (ENHANCED I/O)
  • 2 differential inputs (TRA1, TRA2)
  • 1 isolated output (STA)
  • 2 multimode input/output lines (ISOA1, ISOA2)
Usage
  • Camera and image acquisition trigger
  • Light strobe trigger
  • Camera synchronization using motion encoder
  • General purpose IO
Electrical specifications
  • ISOA1, ISOA2: Inputs or outputs, isolated up to 500 V:
    • Input: compatible with TTL or 12V signals
    • Output: TTL, open-collector or open-emitter
  • TRA1, TRA2: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • STA: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
Filter control
  • Glitch removal filter available on input lines used as trigger sources:
  • Configurable with five time constants:
    • 100 ns, 500 ns and 2.5 µs for trigger/ page trigger /page end trigger sources
    • 100 ns, 500 ns, 2.5 µs for line trigger source
Power output
  • Non-isolated +5V, 1A and +12V, 500 mA with self-resettable fuse protection
  • Isolated +5V 250 mA with electronic fuse protection
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
Operating ambient air temperature 0 °C to +50 °C / +32 °F to +122 °F
Operating ambient air humidity 10% to 90% RH non-condensing
Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55022:2010 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 Class B
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-4
  • EN 61000-4-6
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2015/863 (ROHS3)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description