Easy3D

3D 图像处理库

特性一览
  • 点云处理和管理
  • 灵活生成 ZMap
  • 裁剪、大幅减少、拟合和对齐点云的 3D 处理功能
  • 兼容众多 3D 传感器
  • 使用3D查看器进行交互式 3D 显示



比较 购买地点


Easy3D Description
Easy3D Description

Easy3D>Easy3D是Open eVision 3D库的基础库。它包含一组管理3D深度图、点云和Zmap对象的功能。使用任何Open eVision 3D库时都需要Easy3D>Easy3D,在购买Easy3D>Easy3DLaserLine、Easy3D>Easy3DObject、Easy3D>Easy3DMatch或3D Bundle时会提供。


兼容 3D 传感器
兼容 3D 传感器

The Easy3D library is able to import data from third-party 3D sensors from Automation Technology, Azure Kinect, Benano, IDS Ensenso, Intel Realsense, Lucid Helios, LMI Gocator, Photoneo PhoXi, Shenzhen SinceVision (SSZN), Zivid and others. Point Clouds and ZMaps are managed efficiently and allow 3D processing and analysis to be performed.


Open eVision 3D Studio
Open eVision 3D Studio

Open eVision 3D Studio 应用程序利用 Coaxlink Quad 3D-LLE 图像采集卡以及 Easy3D 和 Easy3DLaserLine 库极大简化了单/双 3D 激光线检查系统的配置。

Open eVision 3D Studio 是免费软件,无需任何许可证。

单击“下载 OPEN EVISION 3D STUDIO”,然后安装 Open eVision。其中包含示例图像、手册和示例程序。


所有Open eVision库都适用于Windows和Linux
所有Open eVision库都适用于Windows和Linux

  • Windows 7到Windows 10,x86(32位)和x86-64(64 位)
  • 带有 glibc 2.18 或更高版本的 Linux x86-64(64 位)


点云处理
点云处理

校准后,3D 点云包含使用真实世界 3D 坐标系统的无失真数据。使用 Easy3D 功能处理 3D 点云,例如坐标变换、点云裁剪和抽取,平面寻找和拟合或部件对齐。


3D 查看器
3D 查看器

使用 Easy3D 的 3D Viewer 类创建交互式 3D 显示。3D 查看器可以显示点云和 3D 对象。它使用 OpenGL 接口,需要兼容的显示设备。


Neo许可系统
Neo许可系统

  • Neo是Euresys的新型许可系统。它可靠而又先进,现在可用于存储Open eVision和eGrabber许可证。
  • Neo支持您在Neo Dongle或Neo Software Container中选择许可证激活位置。先购买许可证,以后再做决定。
  • Neo Dongle提供坚固的硬件,能灵活地从一台PC传输到另一台PC。
  • Neo Software Container无需任何专用硬件,而是链接到其中已激活的计算机。
  • Neo 自带专用的 Neo License Manager,它具有两种特点:直观、易用的图形用户界面和命令行界面,可轻松地自动执行 Neo 许可程序。


ZMap 生成
ZMap 生成

ZMap 是点云在参照平面上的投影,其中距离存储为像素灰度值。ZMap 无失真,采用公制坐标系。Easy3D 提供生成该类 ZMap 的功能。更重要的是,您可以对 ZMap 应用所有 Open eVision 2D 处理功能:使用 EasyImage 过滤和处理阈值,使用 EasyObject 进行斑点分析,使用 EasyGauge 进行亚像素测量,使用 EasyFind 和 EasyMatch 进行图案匹配...


Photometric Stereo for 3D surface inspection
Photometric Stereo for 3D surface inspection

The Photometric Stereo function estimates the orientation and albedo of each point of a surface by acquiring several images of the same surface taken from a single viewpoint, but under illumination from different directions. The method is suitable for the inspection of details (defects or information) present on the surface of objects that cannot be seen by a single camera-light pair and reveals small variations in surface curvature or texture. It can be used as a preprocessing phase to other libraries, such as code reading (EasyMatrixCode, EasyQRCode or EasyBarcode), optical character recognition (EasyOCR), alignment (EasyMatch, EasyFind), measurement (EasyGauge) or defect detection (EasyObject or EasySegment). Photometric Stereo is available in the Easy3D library.


在DG06技术开发部的支持下开发的
在DG06技术开发部的支持下开发的


Software
Host PC Operating System
  • Open eVision is a set of 32-bit and 64-bit libraries that require a processor compatible with the SSE4 instruction set.
  • The Deep Learning Bundle is only available in the 64-bit Open eVision library.
  • Open eVision can be used on the following operating systems:
    • Windows 10 (32- and 64-bits)
    • Windows 8 (32- and 64-bits)
    • Windows 7 (32- and 64-bits)
    • Linux 64 bits (x86-64 only) with a glibc version greater or equal to 2.18
  • Since Open eVision 2.6, discontinued support of:
    • Windows Vista 32-bits Service Pack 1
    • Windows XP 32-bits Service Pack 3
    • Windows Embedded Standard 2009 32-bits
  • Remote connections
    • Remote connections are allowed using remote desktop, TeamViewer or any other similar software.
  • Virtual machines
    • Linux virtual machines are supported. Microsoft Hyper-V and Oracle VirtualBox hypervisors have been successfully tested.
    • Windows virtual machines are not supported.
  • Minimum requirements:
    • RAM: 8 GB
    • Display size: 800 x 600. 1280 x 1024 recommended.
    • Color depth: 16 bits. 32 bits recommended.
    • Between 100 MB and 2 GB free hard disk space for libraries, depending on selected options.
APIs
  • Supported Integrated Development Environments and Programming Languages:
    • Microsoft Visual Studio 2008 SP1 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2010 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2012 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2013 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2015 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2017 (C++, C#, VB .NET, C++/CLI)
    • Microsoft Visual Studio 2019 (C++, C#, VB .NET, C++/CLI)
    • QtCreator 4.15 with Qt 5.12
  • Since Open eVision 2.5.1, discontinued support of:
    • Borland C++ Builder 6.0 update 4 (C++)
    • CodeGear Delphi 2009 (Object Pascal)
    • CodeGear C++ Builder 2009 (C++)
    • Microsoft Visual Studio 6.0 SP6 (C++, Basic)
    • ActiveX API
  • Since Open eVision 2.4.1, discontinued support of:
    • Embarcadero RAD Studio XE4 and XE5 (C++, Object Pascal, 32 bits only)
Ordering Information
Product code - Description
Optional accessories