Domino Symphony PCIe
Framegrabber für 4 Single-Tap analoge Nichtstandard-Kameras
© EURESYS S.A. - Subject to change without notice
8/26/2024 Datasheet Framegrabber für 4 Single-Tap analoge Nichtstandard-Kameras /--/uploads/2024/08/1601_DominoSymphonyPCIe_1.png)
Main benefitsSpezifikationenMechanical
Host bus
Camera / video inputs
On-board processing
General Purpose Inputs and Outputs
Software
Environmental conditions
Certifications
Ordering Information
Offices
|
Main benefits
Spezifikationen
Mechanical
- Form factor
PCI Express card
- Format
Standard profile, half length, 1-lane PCI Express card
- Dimensions
PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
- Weight
Net weight: 168 g [5.9 oz]
Gross weight: 240 g [8.5 oz]
Host bus
- Standard
PCI Express 1.0
- Link width
1 lane
- Link speed
2.5 GT/s (PCIe 1.0)
- DMA
32-bit
- Peak delivery bandwidth
256 MB/s
- Effective (sustained) delivery bandwidth
180 MB/s (Host PC motherboard dependent)
- Power consumption
Typ. 8.3 W (940 mA @ +3.3V, 430 mA @ +12V), excluding I/O power output
Camera / video inputs
- Camera interface standard
Non-standard analog
- Interface standard(s)
Non-standard Analog
- Connectors
CAMERAS: high-density sub-D 44-pin male connector for video and camera control
Internal video: 10-pin shrouded header video connector on the PCB
- Termination resistor
Selectable by software
- Number of cameras
Four single-tap cameras
- Number of cameras (at full frame rate)
4
- Maximum number of cameras
4
- A/D converter
Four, 10-bit, 65 MHz
- Maximum camera line rate
52.5 kHz
On-board processing
- On-board memory
64 MB (32 MB for image data)
- Input LUT (Lookup Table)
4 x 8- or 10-bit LUT
General Purpose Inputs and Outputs
- Number of lines
32 I/O lines:
4 contact inputs (Factory I/O: IN)
12 relay outputs (Factory I/O: OUT)
4 TTL inputs/outputs (System: IO)
4 differential inputs (System: TR)
4 opto-isolated outputs (System: ST)
4 full-duplex serial com ports (Camera COM: RX/TX)
- Connectors
EXTERNAL SYSTEM: 26-pin high-density male sub-D connector on the bracket
INTERNAL SYSTEM: 26-pin dual-row 0.1" shrouded header on the PCB
FACTORY I/O: 34-pin dual-row 0.1" shrouded header on the PCB
CAMERA COM: 16-pin dual-row 0.1" shrouded header on the PCB
Molex 4-pin connector on the PCB for powering cameras
- Usage
Camera and image acquisition trigger
Light strobe trigger
General purpose IO
- Electrical specifications
TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
IO: Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
IN: Polarity-free inputs, compatible with TTL, 12V and 24V signals, opto-couplers, relays and switches
OUT: Opto-isolated potential-free and polarity-free solid-state outputs, compatible with signals up to 30V, with 4 µs fall time, isolated up to 500V
COM: RS232 asynchronous serial communication lines to control the cameras (exposed to the OS as standard COM ports)
Software
- Host PC Operating System
Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
- APIs
MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
- Operating ambient air temperature
0 °C to +50 °C / +32 °F to +122 °F
- Operating ambient air humidity
10% to 90% RH non-condensing
- Storage ambient air temperature
-20 °C to +70 °C/ -4 °F to +158 °F
- Storage ambient air humidity
10% to 90% RH non-condensing
Certifications
- EMC standards
European Council EMC Directive 2004/108/EC
- EMC - Emission
EN 55022:2010 Class B
- EMC - Immunity
EN 55024:2010 Class B
- KC Certification
Korean Radio Waves Act, Article 58-2, Clause 3
- Flammability
PCB compliant with UL 94 V-0
- RoHS
European Union Directive 2015/863 (ROHS3)
- REACH
European Union Regulation 1907/2006
- WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
- Product code - Description
PC1601 Domino Symphony PCIe
- Related products
PC6011 Symphony Spider Cable
Downloadbereich
MultiCam
- MultiCam 6.19 is the last version available for Windows x86 and Linux x86
- The -win7- packages are for Windows 7 and Windows 8.1 only
- The -win10- packages are for Windows 10 and Windows 11 only
- Support for Windows 7, Windows 8.1, Windows Server 2008 R2, and Windows Server 2012 R2 will end on December 31st, 2024
- Windows x86 (32-bit) and Linux x86 (32-bit) were supported up to MultiCam 6.19
- The following boards were supported up to MultiCam 6.18:
- Domino Alpha 2
- Grablink Avenue
- Grablink Express
- Grablink Value
- Windows XP was supported up to MultiCam 6.9.8
- Grablink Expert 2 was supported up to MultiCam 6.9.8
- Domino Iota was supported up to MultiCam 6.9.5
- Grablink Quickpack ColorScan and Grablink Quickpack CFA PCIe were supported up to MultiCam 6.9.4
- The following boards were supported up to MultiCam 6.9.0.2200:
- Domino Symphony
- Grablink Quickpack CFA
- Grablink Expert 2 cPCI
- Grablink Value cPCI
- Picolo Pro 3
- Picolo Diligent
- Picolo Diligent Plus
- Windows Vista and Windows Server 2008 were supported up to MultiCam 6.8.2
- Domino Delta was supported up to MultiCam 6.4.3
- Windows Server 2003 was supported up to MultiCam 6.4.2
- Windows 2000 was supported up to MultiCam 6.4.0
- Picolo Jet-X was supported up to MultiCam 6.3.0