Preliminary
CoaXPressCXP-over-Fiber
Coaxlink CXP-12 to QSFP+ Converter
Four-connection CoaXPress CXP-12 to CoaXPress-over-Fiber converter
Compare our products
Products to compare
Filter by product family
Preliminary
CoaXPressCXP-over-Fiber
Coaxlink CXP-12 to QSFP+ Converter
Four-connection CoaXPress CXP-12 to CoaXPress-over-Fiber converter
Mechanical
Form factor
Stand-alone device
Cooling method
Air cooling, fan-cooled heatsink
Housing
Aluminum housing
Mounting
Desktop
Connectors
'A', 'B', 'C', 'D' on front panel:
4x Micro BNC female connectors
CoaXPress host interface
'QSFP+' on rear panel:
Enhanced Quad Small Form-factor Pluggable port
CoaXPress-over-Fiber device interface
'POWER IN' on rear panel:
2-pin 5.08mm pitch terminal socket
24 V DC power input for internal use and PoCXP
LED indicators
'A', 'B', 'C', 'D' on front panel:
Bi-color red/green LEDs
CoaXPress Host connector indicator
'A', 'B', 'C', 'D' on rear panel:
Bi-color red/green LEDs
CoaXPress Device connector indicator
'FPGA OK' on rear panel:
Bi-color red/green LED
FPGA status indicator
'BOARD OK' onrear panel:
Bi-color red/green LED
Board status indicator
Dimensions
L x H x D: 112 mm x 55 mm x 208 mm [4.4 in x 2.2 in x 8.2 in]
Weight
Net weight: 776 g [27.4 oz]
Gross weight: 930 g [32.8 oz]
Camera / video inputs
Status LEDs
One CoaXPress Host connection status LED per connection
Supported CXP down-connection speeds
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Supported CXP up-connection speeds
Low-speed 20.83... Mbps (CXP-1 to CXP-6)
Low-speed 41.66... Mbps (CXP-10, CXP-12)
Number of CXP data streams (per camera)
1 data stream per camera
Maximum CXP stream packet size
16,384 bytes
PoCXP (Power over CoaXPress)
PoCXP Safe Power:
PoCXP Device detection and automatic power-on
Overload and short-circuit protections
A +24V power source must be connected to the POWER IN connector
Camera interface standard
CoaXPress
Number of cameras
Area-scan cameras:
One 1- or 2- or 4-connection camera
Line-scan cameras:
One 1- or 2- or 4-connection camera
Interface standard(s)
CoaXPress 1.0, 1.1, 1.1.1 and 2.0, CoaXPress-over-Fiber Bridge Protocol 1.0
Maximum link speed
CXP-over-Fiber
Maximum number of cameras
1
Maximum link width
4 connections
Line-scan cameras supported
Yes
Camera powering
PoCXP
Maximum aggregated camera data transfer rate
50 Gbit/s (5,000 MB/s)
Connectors
Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
Environmental conditions
Operating ambient air temperature
0 °C to +50 °C / +32 °F to +122 °F (TBC)
Operating ambient air humidity
10% to 90% RH non-condensing (TBC)
Storage ambient air temperature
-20 °C to +70 °C/ -4 °F to +158 °F (TBC)
Storage ambient air humidity
10% to 90% RH non-condensing (TBC)
Certifications
KC Certification
Korean Radio Waves Act, Article 58-2, Clause 3
Flammability
PCB compliant with UL 94 V-0
RoHS
European Union Directive 2015/863 (ROHS3)
REACH
European Union Regulation 1907/2006
WEEE
Must be disposed of separately from normal household waste and must be recycled according to local regulations
Electromagnetic - EMC standards
European Council EMC Directive 2014/30/EU
United States FCC rule 47 CFR 15
EMC - Emission
EN 55032:2015 / CISPR 32:2012 Class A
FCC 47 Part 15 Class A
EMC - Immunity
TBD
Electrical
Supply voltage
24 V DC (tolerance. TBD), via external power supply block (not included)
Power connector
POWER IN connector: 2-pin 5.08 mm pluggable terminal block socket
Power consumption
29 W for internal use (estimation TBC)
4 x 17 W for PoCXP
Ordering Information
Product code - Description
3629 Coaxlink CXP-12 to QSFP+ Converter