製品の比較

比較する製品

製品を見る
NRND
Not recommended for new design
非標準アナログ
Domino Melody
シングルタップ非標準アナログカメラ1台用のロープロファイルフレームグラバー
製品ファミリーで絞り込む
製品を見る
NRND
Not recommended for new design
非標準アナログ
Domino Melody
シングルタップ非標準アナログカメラ1台用のロープロファイルフレームグラバー

Mechanical

Form factor

PCI card

Format

Low profile, half-length, 32-bit Conventional PCI card

Dimensions

L 168 mm x H 64 mm

L 6.6 in x H 2.21 in

Weight

Net weight: 82 g [2.9 oz]

Gross weight: 185 g [6.5 oz]

Host bus

Standard

PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling

DMA

32-bit

Peak delivery bandwidth

132 MB/s

Effective (sustained) delivery bandwidth

90 MB/s (Host PC motherboard dependent)

Power consumption

Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output

Camera / video inputs

Camera interface standard

Non-standard analog

Interface standard(s)

Non-standard Analog

Connectors

CAMERA: high-density sub-D 15-pin male connector on the bracket

Camera internal: 10-pin shrouded header video connector on the PCB

Termination resistor

Selectable by software

Number of cameras

One single-tap camera

Number of cameras (at full frame rate)

1

Maximum number of cameras

1

A/D converter

One, 10-bit, 40 MHz

Maximum camera line rate

49.5 kHz in synchronous mode

31.5 kHz in asynchronous reset mode

On-board processing

On-board memory

16 MB (8 MB for image data)

Input LUT (Lookup Table)

1 x 8- or 10-bit LUT

General Purpose Inputs and Outputs

Number of lines

4 I/O lines:

1 differential input (TR)

1 opto-isolated output (ST)

2 TTL inputs/outputs (ENHANCED IO)

Connectors

SYSTEM: 8-pin RJ-45 connector on the bracket

SYSTEM INTERNAL: 10-pin dual-row 0.1" shrouded header on the PCB

CAMERA POWER: 4-pin Molex connector on the PCB for camera powering

Usage

Camera and image acquisition trigger

Light strobe trigger

General purpose IO

Electrical specifications

TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise

ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V

ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter

Software

Host PC Operating System

Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures

Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures

Refer to release notes for details

APIs

MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers

Environmental conditions

Operating ambient air temperature

0 °C to +50 °C / +32 °F to +122 °F

Operating ambient air humidity

10% to 90% RH non-condensing

Storage ambient air temperature

-20 °C to +70 °C/ -4 °F to +158 °F

Storage ambient air humidity

10% to 90% RH non-condensing

Certifications

EMC standards

European Council EMC Directive 2004/108/EC

United States FCC rule 47 CFR 15

EMC - Emission

EN 55022:2010 Class B

FCC 47 Part 15 Class B

EMC - Immunity

EN 55024:2010 Class B

EN 61000-4-2

EN 61000-4-3

EN 61000-4-4

KC Certification

Korean Radio Waves Act, Article 58-2, Clause 3

Flammability

PCB compliant with UL 94 V-0

RoHS

European Union Directive 2015/863 (ROHS3)

REACH

European Union Regulation 1907/2006

WEEE

Must be disposed of separately from normal household waste and must be recycled according to local regulations

Ordering Information

Product code - Description

PC1167 Domino Melody

エキスパートに問い合わせる

当社はあらゆる業界のビジネスにソリューションとアドバイスを提供しています。

お問い合わせ