Grablink Full - Euresys

FullコンフィギュレーションのCamera Linkカメラ1台用フレームグラバー

80ビット/72ビット/Full/Medium/BaseコンフィギュレーションのCamera Linkカメラ1台用

市販の数百種のCamera Linkカメラに直接対応

ECCO：Extended Camera Linkケーブル長

PCIe x4 バス：850 MB/秒の持続配信帯域幅

機能が豊富な10本のデジタルI/Oライン

Mementoイベントログ取得ツール

データシート

比較販売店

© EURESYS S.A. - Subject to change without notice


8/14/2024 Datasheet Grablink Full FullコンフィギュレーションのCamera Linkカメラ1台用フレームグラバー 80ビット/72ビット/Full/Medium/BaseコンフィギュレーションのCamera Linkカメラ1台用市販の数百種のCamera Linkカメラに直接対応 ECCO：Extended Camera Linkケーブル長 PCIe x4 バス：850 MB/秒の持続配信帯域幅機能が豊富な10本のデジタルI/Oライン Mementoイベントログ取得ツール Main benefits Other benefits 仕様 Mechanical Form factor PCI Express card Format Standard profile, half length, 4-lane PCI Express card Cooling method Air-cooling, fanless Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot Connectors 'BASE' on bracket: 26-position Shrunk Delta Ribbon (SDR) socket Camera Link Base connector 'MEDIUM/FULL' 26-position Shrunk Delta Ribbon (SDR) socket Camera Link Medium/Full/80-bit connector 'EXTERNAL I/O' on bracket: 26-pin 3-row high-density female sub-D connector I/O lines and power output 'INTERNAL I/O' on PCB: 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and power output 'POWER INPUT' on module: 4-pin MOLEX power socket 12 VDC power input for I/O Dimensions PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in Weight Net weight: 133 g [4.7 oz] Gross weight: 235 g [8.3 oz] Host bus Link speed 2.5 GT/s (PCIe 1.0) Standard PCI Express 1.0 Link width 4 lanes Maximum payload size 1024 bytes DMA 32- and 64-bit Peak delivery bandwidth 1,024 MB/s Effective (sustained) delivery bandwidth Up to 833 MB/s for a PCI Express payload size of 256 bytes and 64-bit addressing Up to 844 MB/s for a PCI Express payload size of 256 bytes and 32-bit addressing Up to 754 MB/s for a PCI Express payload size of 128 bytes and 64-bit addressing Up to 780 MB/s for a PCI Express payload size of 128 bytes and 32-bit addressing Power consumption Max. 6.9 W; Typ. 5.7 W (0.48 A @ 3.3V;0.34 A @+12V) Camera / video inputs Camera Link configuration Base, Medium, Full, 72-bit, 80-bit Note: Unpacking to 16-bit and image reconstruction are not available for the 8x 10-bit variant of the 80-bit configuration. Camera Link clock frequency From 20 MHz up to 85 MHz ECCO - Extended Camera Link Cable Operation ECCO Camera types Grayscale and color (RGB and Bayer) area- and line-scan cameras Camera interface standard Camera Link Number of cameras One 80-bit / 72-bit / Full / Medium / Base configuration camera Camera pixel formats supported Mono8, Mono10, Mono12, Mono14, Mono16 BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG RGB8, RGB10, RGB12, RGB14, RGB16 Interface standard(s) Camera Link 2.0 Maximum link speed 85 MHz Maximum number of cameras 1 Maximum link width 80-bit Line-scan cameras supported Yes Camera powering PoCL Maximum aggregated camera data transfer rate 6.8 Gbit/s (850 MB/s) Connectors Two Shrunk Delta Ribbon (SDR) Miniature Camera Link (MiniCL) Area-scan camera control Trigger Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation. Strobe Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses. Line-scan camera control Scan/page trigger Precise control of start-of-scan and end-of-scan triggers. Support of external hardware trigger, with optional delay. Support of infinite acquisition, without missing line, for web inspection applications. Line trigger Support for quadrature motion encoders, with programmable noise filters, selection of acquisition direction and backward motion compensation. Rate Converter tool for fine control of the pixel aspect ratio. Rate Divider tool Line strobe Accurate control of the strobe position for strobed light sources. On-board processing Bayer CFA to RGB decoder Advanced interpolation method using average and median functions on a 3x3 kernel Up to 225 MPixel/s On-board memory 128 MB (64 MB for image data) Image data stream processing Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb Input LUT (Lookup Table) Monochrome: 8-bit, 10-bit or 12-bit per pixel, up to 1000 MPixel/s RGB: 3x8-bit, 3x10-bit or 3x12-bit per pixel, up to 250 MPixel/s General Purpose Inputs and Outputs Power output Non-isolated, +5V, 1A and +12V, 1A, with electronic fuse protection Number of lines 10 I/O lines: 2 differential inputs (DIN) 4 isolated inputs (IIN) 4 isolated outputs (IOUT) Usage The input lines can be used by the acquisition channel as: Camera frame trigger source (area-scan only) Acquisition sequence trigger source (area-scan only) Camera line trigger source (line-scan only) Page acquisition trigger source (line-scan only) Page acquisition end trigger source (line-scan only) (Quadrature) motion encoder input (line-scan only) The IOUT 1 output line can be used by the acquisition channel as: Illumination strobe output All the input lines can be used as general purpose inputs All the output lines can be used as general purpose outputs Electrical specifications DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers IOUT: Isolated contact outputs compatible with 30V / 100mA loads NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock! Filter control Glitch removal filter available only on input lines used as trigger sources Configurable with five time constants: 100 ns, 500 ns, and 2.5 µs for trigger / page trigger / page end trigger sources 40 ns, 100 ns, 200 ns, 500 ns, 1 µs, 5 µs, 10 µs for line trigger sources Software Supported Memento event categories Yes APIs MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers Host PC Operating System Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures Refer to release notes for details Environmental conditions Operating ambient air temperature 0 °C to +50 °C / +32 °F to +122 °F Operating ambient air humidity 10% to 90% RH non-condensing Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F Storage ambient air humidity 10% to 90% RH non-condensing Certifications KC Certification Korean Radio Waves Act, Article 58-2, Clause 3 Flammability PCB compliant with UL 94 V-0 RoHS European Union Directive 2015/863 (ROHS3) REACH European Union Regulation 1907/2006 WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations Electromagnetic - EMC standards European Council EMC Directive 2014/30/EU United States FCC rule 47 CFR 15 EMC - Emission EN 55022:2010 / CISPR 22:2008 Class B EN 55032:2015 / CISPR 32:2012 Class B FCC 47 Part 15 Class B EMC - Immunity EN 55024:2010 / CISPR 24:2010 EN 55035:2017 / CISPR 35:2016 EN 61000-4-2:2009 EN 61000-4-3:2006 EN 61000-4-4:2004 EN 61000-4-5:2014 EN 61000-4-6:2014 Ordering Information Product code - Description 1622 Grablink Full Related products 3305 C2C SyncBus Cable 3306 C2C Quad SyncBus Cable Offices ヨーロッパ、中東、アフリカ地区 Euresys SA Contact support : [email protected] Sensor to Image GMBH Contact support : [email protected] 中国 Euresys上海リエゾン支店 Contact support : [email protected] Euresys深センリエゾン支店 Contact support : [email protected] 日本 Euresys Japan K.K. Contact support : Support [email protected] 韓国 Euresys韓国リエゾン支店 Contact support : [email protected] アジア地区（その他の国） Euresys Pte. Ltd. Contact support : [email protected] 北米、中米、南米地区 Euresys Inc. Contact support : [email protected]

Grablink Full