당사 제품 비교

비교할 제품

제품 보기
NRND
Not recommended for new design
비표준 아날로그
Domino Melody
단일 탭 비표준 아날로그 카메라 1대용 로우 프로파일 프레임 그래버
제품군별 필터링
제품 보기
NRND
Not recommended for new design
비표준 아날로그
Domino Melody
단일 탭 비표준 아날로그 카메라 1대용 로우 프로파일 프레임 그래버

Mechanical

Form factor

PCI card

Format

Low profile, half-length, 32-bit Conventional PCI card

Dimensions

L 168 mm x H 64 mm

L 6.6 in x H 2.21 in

Weight

Net weight: 82 g [2.9 oz]

Gross weight: 185 g [6.5 oz]

Host bus

Standard

PCI 32-bit, 33 MHz, 3.3 V and 5 V signaling

DMA

32-bit

Peak delivery bandwidth

132 MB/s

Effective (sustained) delivery bandwidth

90 MB/s (Host PC motherboard dependent)

Power consumption

Max. 6.8 W (1.45 A @ +3.3V, 400 mA @ +5V), excluding I/O power output

Camera / video inputs

Camera interface standard

Non-standard analog

Interface standard(s)

Non-standard Analog

Connectors

CAMERA: high-density sub-D 15-pin male connector on the bracket

Camera internal: 10-pin shrouded header video connector on the PCB

Termination resistor

Selectable by software

Number of cameras

One single-tap camera

Number of cameras (at full frame rate)

1

Maximum number of cameras

1

A/D converter

One, 10-bit, 40 MHz

Maximum camera line rate

49.5 kHz in synchronous mode

31.5 kHz in asynchronous reset mode

On-board processing

On-board memory

16 MB (8 MB for image data)

Input LUT (Lookup Table)

1 x 8- or 10-bit LUT

General Purpose Inputs and Outputs

Number of lines

4 I/O lines:

1 differential input (TR)

1 opto-isolated output (ST)

2 TTL inputs/outputs (ENHANCED IO)

Connectors

SYSTEM: 8-pin RJ-45 connector on the bracket

SYSTEM INTERNAL: 10-pin dual-row 0.1" shrouded header on the PCB

CAMERA POWER: 4-pin Molex connector on the PCB for camera powering

Usage

Camera and image acquisition trigger

Light strobe trigger

General purpose IO

Electrical specifications

TR: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise

ST: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V

ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter

Software

Host PC Operating System

Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures

Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures

Refer to release notes for details

APIs

MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers

Environmental conditions

Operating ambient air temperature

0 °C to +50 °C / +32 °F to +122 °F

Operating ambient air humidity

10% to 90% RH non-condensing

Storage ambient air temperature

-20 °C to +70 °C/ -4 °F to +158 °F

Storage ambient air humidity

10% to 90% RH non-condensing

Certifications

EMC standards

European Council EMC Directive 2004/108/EC

United States FCC rule 47 CFR 15

EMC - Emission

EN 55022:2010 Class B

FCC 47 Part 15 Class B

EMC - Immunity

EN 55024:2010 Class B

EN 61000-4-2

EN 61000-4-3

EN 61000-4-4

KC Certification

Korean Radio Waves Act, Article 58-2, Clause 3

Flammability

PCB compliant with UL 94 V-0

RoHS

European Union Directive 2015/863 (ROHS3)

REACH

European Union Regulation 1907/2006

WEEE

Must be disposed of separately from normal household waste and must be recycled according to local regulations

Ordering Information

Product code - Description

PC1167 Domino Melody

전문가에게 문의

당사는 모든 업계 비즈니스를 위한 솔루션과 조언을 제공합니다.

연락처 정보