Coaxlink Quad CXP-3
CXP-3 전용 4-연결부 CoaXPress 프레임 그래버
© EURESYS S.A. - Subject to change without notice
8/14/2024 Datasheet CXP-3 전용 4-연결부 CoaXPress 프레임 그래버
Main benefitsOther benefits사양Mechanical
Host bus
Camera / video inputs
Frame grabber / video outputs
Video delivery
Audio / Video Outputs
Audio modules
Audio inputs
Audio outputs
Area-scan camera control
Line-scan camera control
On-board processing
On-board video codec
General Purpose Inputs and Outputs
C2C-Link
Streaming
Network
User authentication and access policy
Encryption mechanisms
Standard and proprietary APIs
User interface
System integration
Electrical
Host system requirements
Software
Environmental conditions
Certifications
Reliability
Image processing
Ordering Information
Offices
|
주요 내용
CoaXPress는 고속 이미지 데이터 전송을 위해 개발된 디지털 인터페이스 표준입니다.
CoaXPress(CXP)는 머신 비전, 의료 영상, 생명 과학, 방송 및 방위와 같은 전문 및 산업용 이미징 애플리케이션에서 고속 이미지 데이터 전송을 위해 개발되었습니다.
CoaXPress의 고유한 특징은 카메라에서 호스트 PC 프레임 그래버로 고속 비디오 데이터를 스트리밍하는 것과 카메라에 대한 명령 및 제어 업링크를 포함한 양방향 데이터 통신에 동축 케이블을 사용한다는 점입니다. 또한 인터페이스는 쉽게 확장할 수 있어 카메라는 1개, 2개, 4개, 8개 또는 16개의 연결부를 사용하여 업계 최고 대역폭을 구현할 수 있습니다. 이로 인해 CoaXPress는 고속 이미징을 위한 최고의 인터페이스가 되었습니다.
Main benefits
Other benefits
- Memento자세히 알아보기영상을 사용하는 고급 검사기에서 프레임 그래버는 카메라 자체는 말할 것도 없고 모션이나 조명 제어기와 같은 수많은 외부 장치와 동기화하여 이미지를 수집하는 역할을 합니다. 이러한 시스템을 디버깅하려면 일반적으로 예를 들어 오실로스코프나 논리 분석기와 같이 소프트웨어 프로파일러와 함께 사용되는 복잡한 장비가 필요합니다. 초당 수백 또는 수천 프레임이 넘는 매우 빠른 프레임 레이트를 지원하는 최신 카메라가 나오면서 이 문제가 더욱 심각해지고 있습니다.
- GenICam자세히 알아보기GenICam은 산업용 카메라를 컴퓨터 소프트웨어 애플리케이션(예: 머신 비전)에 연결하기 위한 세계 표준 세트입니다. 이를 통해 이미지 처리, 획득 및 전송의 문구, 인터페이스 및 프로세스를 균일화할 수 있습니다. 모든 사용자에게 공통된 이름과 구성 세트를 제공함으로써 공급업체의 구현 세부 사항, 기능 세트 또는 인터페이스 기술에 관계없이 커뮤니케이션을 보장합니다. 이것은 GigE Vision, USB3 Vision, CoaXPress 및 Camera Link 같은 고속 비디오 표준의 기반입니다.
사양
Mechanical
- Form factor
- null
- Format
- null
- Cooling method
- null
- Housing
- null
- Mounting
- null
- Connectors
- null
- LED indicators
- null
- Switches
- null
- Dimensions
- null
- Weight
- null
- PCB connectors
- null
- Flat cable
- null
Host bus
- Standard
- null
- Link width
- null
- Link speed
- null
- Maximum payload size
- null
- DMA
- null
- Peak delivery bandwidth
- null
- Effective (sustained) delivery bandwidth
- null
- PCI Express slot power rating
- null
- Power consumption
- null
Camera / video inputs
- Camera interface standard
- null
- Interface standard(s)
- null
- Maximum link speed
- null
- Maximum link width
- null
- Camera powering
- null
- Connectors
- null
- Termination resistor
- null
- Formats and standards (HD)
- null
- Formats and standards (SD)
- null
- Status LEDs
- null
- Video inputs
- null
- Native resolution
- null
- Frame rate
- null
- Event reporting
- null
- Video presence indicators
- null
- ECCO - Extended Camera Link Cable Operation
- null
- Number of cameras
- null
- Number of cameras (at full frame rate)
- null
- Maximum number of cameras
- null
- Line-scan cameras supported
- null
- Maximum aggregated camera data transfer rate
- null
- A/D converter
- null
- Maximum camera line rate
- null
- Camera Link configuration
- null
- Camera Link clock frequency
- null
- Supported CXP down-connection speeds
- null
- Supported CXP up-connection speeds
- null
- Number of CXP data streams (per camera)
- null
- Maximum CXP stream packet size
- null
- PoCL (Power over Camera Link)
- null
- PoCXP (Power over CoaXPress)
- null
- Camera types
- null
- Camera pixel formats supported
- null
- Maximum image size
- null
Frame grabber / video outputs
- Interface standard
- null
- Interface standard(s)
- null
- Maximum link speed
- null
- Maximum link width
- null
- Maximum data rate
- null
- Connectors
- null
- Status LEDs
- null
Video delivery
- Raw video format(s)
- null
- Deliverable video resolution (HD)
- null
- Deliverable video resolution (SD)
- null
Audio / Video Outputs
- Loop-through
- null
- Connectors
- null
Audio modules
- Specification
- null
Audio inputs
- Number of inputs
- null
- Type
- null
- Sampling rate
- null
- Audio format
- null
- Time stamping resolution
- null
- Connectors
- null
Audio outputs
- Number of outputs
- null
- Type
- null
- Audio format
- null
- Time stamping resolution
- null
- Connectors
- null
Area-scan camera control
- Trigger
- null
- Strobe
- null
Line-scan camera control
- Scan/page trigger
- null
- Line trigger
- null
- Line strobe
- null
On-board processing
- On-board memory
- null
- Image data stream processing
- null
- Flat-field correction
- null
- Input LUT (Lookup Table)
- null
- Geometrical operators
- null
- Bayer CFA to RGB decoder
- null
- Pixel binning
- null
- CustomLogic
- null
- CustomLogic firmware variants
- null
- Data stream statistics
- null
- Event signaling and counting
- null
- Video
- null
On-board video codec
- On-board video compression
- null
- Video encoders
- null
- Number of streams
- null
- Video decoders
- null
- Video stream control
- null
- Bitrate
- null
- Video streams resolution
- null
- MJPEG encoding performance
- null
- Latency
- null
- Video processing
- null
General Purpose Inputs and Outputs
- Number of lines
- null
- Connectors
- null
- Usage
- null
- Electrical specifications
- null
- Filter control
- null
- Polarity control
- null
- Power output
- null
- I/O Toolbox tools
- null
- I/O Toolbox composition
- null
- Watchdog
- null
C2C-Link
- Description
- null
- Specification
- null
Streaming
- Media transport protocol
- null
- Media transport control protocol
- null
- RTP transport modalities
- null
Network
- LAN interface
- null
- LAN connector
- null
- Application layer protocols
- null
- Transport layer protocols
- null
- Internet layer protocols
- null
- IP address allocation methods
- null
- Number of IP address/MAC address
- null
User authentication and access policy
- HTTP and RTSP authentication
- null
- WS authentication
- null
- Web pages
- null
- Access policy
- null
Encryption mechanisms
- Web service
- null
- HTTPS web pages
- null
Standard and proprietary APIs
- ONVIF Profile S 1.0
- null
- Proprietary web services
- null
- Maintenance client interface
- null
- Web pages
- null
User interface
- Local interface
- null
System integration
- Alarm inputs
- null
- Alarm inputs connectors
- null
- Relay outputs
- null
- Relay outputs connectors
- null
- COM
- null
- COM connector
- null
- Pan/Tilt/Zoom protocol
- null
- USB Ports
- null
- USB GPS Receiver
- null
- USB Storage
- null
- Watchdog
- null
Electrical
- Supply voltage
- null
- Power connector
- null
- Power consumption
- null
- Power status
- null
- AC input
- null
- DC output
- null
- Rated power
- null
Host system requirements
- Processor
- null
- System memory
- null
- Graphic card
- null
Software
- Driver name
- null
- First release
- null
- Last release
- null
- Current release
- null
- Host PC Operating System
- null
- APIs
- null
- Memento supported
- null
- Related libraries
- null
Environmental conditions
- Operating ambient air temperature
- null
- Operating ambient air humidity
- null
- Storage ambient air temperature
- null
- Storage ambient air humidity
- null
- Dissipated power
- null
- Shock and vibration
- null
Certifications
- Certification marks
- null
- Safety standards
- null
- EMC standards
- null
- EMC - Emission
- null
- EMC - Immunity
- null
- KC Certification
- null
- Temperature
- null
- Shock and vibration
- null
- Flammability
- null
- RoHS
- null
- REACH
- null
- WEEE
- null
Reliability
- MTBF
- null
- Failure rate
- null
Image processing
- Input
- null
- Output
- null
- Performance
- null
- Requirements
- null
Ordering Information
- Product status
- null
- Product code - Description
- null
- Options
- null
- Included accessories
- null
- Optional accessories
- null
- Included libraries
- null
- Related products
- null
다운로드 영역
eGrabber for Coaxlink, Grablink Duo, and Gigelink
- Windows 10 versions older than 1809 and Windows Server 2016 were supported up to eGrabber 25.12
- Linux kernel versions older than 4.4 and GNU C Library versions older than 2.23 were supported up to eGrabber 25.12
- macos-aarch64-kext and macos-x86_64-kext driver packages were supported up to eGrabber 25.12
- Coaxlink Quad CXP-12 JPEG was supported up to eGrabber 25.12
- The
Coaxlink_NetApi.dllassembly was supported up to eGrabber 25.03 - Windows 7, Windows 8.1, Windows Server 2008 R2, and Windows Server 2012 R2 were supported up to eGrabber 24.12
- Windows x86 (32-bit) was supported up to eGrabber 21.0
- Linux x86 (32-bit) was supported up to eGrabber 17.0
- Before version 12.8, the driver package was called Coaxlink
- Coaxlink Quad CXP-3 was supported up to Coaxlink 10.5.2
Memento
- Windows 10 versions older than 1809 and Windows Server 2016 were supported up to Memento 25.12
- Linux kernel versions older than 4.4 and GNU C Library versions older than 2.23 were supported up to Memento 25.12
- macos-aarch64-kext and macos-x86_64-kext driver packages were supported up to Memento 25.12
- Windows 7, Windows 8.1, Windows Server 2008 R2, and Windows Server 2012 R2 were supported up to Memento 24.12
- Windows x86 (32-bit) was supported up to Memento 21.0
- Linux x86 (32-bit) was supported up to Memento 17.0