Learn more about our product features:
Logo-Memento-(1).png
새 디자인에 사용 금지

Grablink Avenue

Base 구성 Camera Link 카메라 1대용 프레임 그래버

주요 사양
  • Camera Link Base 구성 카메라 1대용
  • 현재 시판되는 수백 가지 Camera Link 카메라와 호환
  • PCI 64비트 66 MHz
  • 온보드 메모리 32 MB
  • 다기능 디지털 IO 라인 9개



비교 구입처 안내


현재 시판되는 수백 가지 Camera Link 카메라와 호환
현재 시판되는 수백 가지 Camera Link 카메라와 호환

지원되는 카메라 페이지를 확인하십시오(지원 메뉴에서)


레이트 컨버터를 사용한 유연한 라인 스캔 카메라 작동

  • 레이트 컨버터는 프로그래밍 가능한 스마트 주파수 체배기/분할기입니다.
  • 모션 인코더 및 라인 스캔 카메라와 함께 사용하면 사용자가 이미지 내 픽셀의 종횡비를 선택할 수 있습니다.
  • 정사각형(가로세로 비율 1:1) 픽셀을 손쉽게 확보하도록 캡처 체인을 조정할 수 있는 방법을 제공합니다.


범용 IO 라인
범용 IO 라인

광범위한 센서 및 모션 인코더와 호환:


Windows 및 Linux 드라이버 제공
Windows 및 Linux 드라이버 제공


고성능 DMA(Direct Memory Access)
고성능 DMA(Direct Memory Access)

  • 사용자 할당 메모리로 직접 전송
  • 하드웨어 분산-수집(scatter-gather) 지원


Mechanical
Format Standard profile, half-length, 64-bit Conventional PCI card
Cooling method Air-cooling, fanless
Mounting For insertion in a standard height, 64-bit, PCI card slot
Connectors
  • 'CAMERA LINK' on bracket:
    • 26-position Mini Delta Ribbon (MDR) socket
    • Camera Link connector
  • 'SYSTEM' on bracket:
    • 26-pin 3-row high-density male sub-D connector
    • I/O lines and power output
  • 'SYSTEM' on PCB:
    • 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
Dimensions L 168 mm x H 107 mm L 6.61 in x H 4.21 in
Host bus
Standard PCI 64-bit, 66 MHz, 3.3 V and 5 V signaling
DMA 32-bit
Peak delivery bandwidth 528 MB/s
Effective (sustained) delivery bandwidth 240 MB/s (Host PC motherboard dependent)
Power consumption Max. 5.35 W (500 mA @ +3.3V, 50 mA @ +5V, 300 mA @ +12V), excluding I/O power output
Camera / video inputs
Interface standard(s) Camera Link
Connectors One Mini Delta Ribbon (MDR) Camera Link (CL)
Number of cameras One Base camera
Maximum aggregated camera data transfer rate 2.04 Gbit/s (255 MB/s)
Camera Link configuration Base
Camera Link clock frequency From 20 MHz up to 85 MHz
Camera types Grayscale and color (RGB and Bayer) area- and line-scan cameras
Video delivery
Raw video format(s)
  • Monochrome formats: Y8, Y10, Y12, Y14, Y16
  • Packed RGB color formats: RGB24, RGB32
  • Planar RGB color formats: RGB24PL, RGB30PL, RGB36PL, RGB42PL, RGB48PL
  • Additional formats: BAYER8, BAYER10, BAYER12, BAYER14, BAYER16, RAW8, RAW10, RAW12, RAW14, RAW16
On-board processing
On-board memory 32 MB (16 MB for image data)
Image data stream processing
  • Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb
General Purpose Inputs and Outputs
Number of lines 9 I/O lines:
  • 4 TTL input/output lines (ENHANCED I/O)
  • 2 differential inputs (TRA1, TRA2)
  • 1 isolated output (STA)
  • 2 multimode input/output lines (ISOA1, ISOA2)
Usage
  • Camera and image acquisition trigger
  • Light strobe trigger
  • Camera synchronization using motion encoder
  • General purpose IO
Electrical specifications
  • ISOA1, ISOA2: Inputs or outputs, isolated up to 500 V:
    • Input: compatible with TTL or 12V signals
    • Output: TTL, open-collector or open-emitter
  • TRA1, TRA2: Inputs compatible with TTL, LVTTL, differential LVDS, differential RS-422, differential RS-485 signals, protected against electrostatic discharge, with choke for the rejection of common-mode noise
  • STA: Opto-isolated outputs, compatible with signals up to 60V, with 3 µs fall time, isolated up to 500V
  • ENHANCED IO Inputs or outputs compatible with TTL signals, protected against electrostatic discharge, with high-frequency noise filter
Filter control
  • Glitch removal filter available on input lines used as trigger sources:
  • Configurable with five time constants:
    • 100 ns, 500 ns and 2.5 µs for trigger/ page trigger /page end trigger sources
    • 100 ns, 500 ns, 2.5 µs for line trigger source
Power output
  • Non-isolated +5V, 1A and +12V, 500 mA with self-resettable fuse protection
  • Isolated +5V 250 mA with electronic fuse protection
Software
Host PC Operating System
  • Microsoft Windows 10, 8.1, 7 for x86 (32-bit) and x86-64 (64-bit) processor architectures
  • Linux for x86 (32-bit) and x86-64 (64-bit) processor architectures
Refer to release notes for details
APIs
  • MultiCam 32- and 64-bit binary libraries (Windows and Linux), for ISO-compliant C/C++ compilers
Environmental conditions
Operating ambient air temperature 0 °C to +50 °C / +32 °F to +122 °F
Operating ambient air humidity 10% to 90% RH non-condensing
Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2004/108/EC
EMC - Emission
  • EN 55022:2010 Class B
EMC - Immunity
  • EN 55024:2010 Class B
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2011/65/EU (ROHS2)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description