4-연결부 CoaXPress CXP-12 to CoaXPress-over-Fiber 컨버터
© EURESYS S.A. - Subject to change without notice
8/15/2024 Datasheet 4-연결부 CoaXPress CXP-12 to CoaXPress-over-Fiber 컨버터 /--/uploads/2024/05/3629_CoaxlinkCXP12toQSFPConverter_1.png)
Main benefitsOther benefits사양Mechanical
Camera / video inputs
Frame grabber / video outputs
Electrical
Environmental conditions
Certifications
Ordering Information
Offices
|
CoaXPress(CXP)는 고 대역폭 컴퓨터 비전 애플리케이션을 위한 사실상의 표준입니다. 이 사양의 최신 버전인 CoaXPress 2.1은 동축 구리 케이블을 통한 12.5Gbps(초당 기가비트) 연결인 CXP-12 속도를 지정합니다.
CoaXPress에서는 링크 통합이 일반적이므로 4개의 CXP-12 연결부로 50Gbps(12.5 x 4)의 대역폭을 쉽게 달성할 수 있습니다. CoaXPress-over-Fiber는 CoaXPress 사양에 대한 추가 기능으로 설계되었습니다. 또한 광섬유를 포함한 표준 이더넷 연결을 통해 수정되지 않은 상태로 CoaXPress 프로토콜을 실행하는 방법을 제공합니다. 따라서 CoaXPress-over-Fiber는 이더넷을 위해 설계된 표준 전자 장치, 커넥터 및 케이블을 사용하지만, 프로토콜은 이더넷이나 GigE Vision이 아닌 CoaXPress입니다.
Stand-alone device
Air cooling, fan-cooled heatsink
Aluminum housing
Desktop
'COAXPRESS A B C D (INPUT)' on front panel:
4 x Micro-BNC 75 Ohms coaxial receptacles
CoaXPress Host Interface
'QSFP+ (OUTPUT)' on rear panel:
Enhanced Quad Small Form-factor Pluggable port
CoaXPress-over-Fiber Device Interface
'POWER' on rear panel:
2-pin 5.08mm pitch terminal socket
24 V DC power input
'A', 'B', 'C', 'D' on front panel:
Bi-color red/green LEDs
CoaXPress Host connector indicator
'A', 'B', 'C', 'D' on rear panel:
Bi-color red/green LEDs
CoaXPress-over-Fiber Device connector indicator
'STATUS' on rear panel:
Bi-color red/green LED
FPGA status indicator
'POWER' on rear panel:
Bi-color red/green LED
Board status indicator
L x H x D: 112 mm x 55 mm x 208 mm [4.4 in x 2.2 in x 8.2 in]
Net weight: 776 g [27.4 oz]
Gross weight: 930 g [32.8 oz]
CoaXPress
CoaXPress 1.0, 1.1, 1.1.1 and 2.0
CXP-12
4 connections
PoCXP
Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12
One CoaXPress Host connection status LED per connection
Area-scan cameras:
One 1- or 2- or 4-connection camera
Four 1-connection cameras (Contact us)
Line-scan cameras:
One 1- or 2- or 4-connection camera
4
Yes
50 Gbit/s (5,000 MB/s)
1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12)
Low-speed 20.83... Mbps (CXP-1 to CXP-6)
Low-speed 41.66... Mbps (CXP-10, CXP-12)
1 data stream per camera
16,384 bytes
PoCXP Safe Power:
PoCXP Device detection and automatic power-on
Overload and short-circuit protections
The +24V power source (POWER) must be able to deliver the power required by the converter and camera(s)
CoaXPress-over-Fiber
CXP-over-Fiber Bridge Protocol 1.1
CoF-10
4 connections
50 Gbit/s (5,000 MB/s)
One Enhanced Quad Small Form-factor Pluggable port (QSFP+)
One CoaXPress-over-Fiber Device status LED per connection
24 V DC +/- 3% (23.25 V - 24.25 V), via external power supply (not included)
'POWER' connector on rear side:
2-pin 5.08 mm pluggable terminal block socket
19.5 W for internal use
4 x 17 W for PoCXP
0 °C to +50 °C / +32 °F to +122 °F
10% to 90% RH non-condensing
-20 °C to +70 °C/ -4 °F to +158 °F
10% to 90% RH non-condensing
European Council EMC Directive 2014/30/EU
United States FCC rule 47 CFR 15
CISPR 32:2015 + A1:2019 Class A
EN 55032:2015 + A11:2020 Class A
CISPR 35:2016
EN 55035:2017 + A11:2020
IEC 61000-6-2:2016 / EN 61000-6-2:2019
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-6
Korean Radio Waves Act, Article 58-2, Clause 3
PCB compliant with UL 94 V-0
European Union Directive 2015/863 (ROHS3)
European Union Regulation 1907/2006
Must be disposed of separately from normal household waste and must be recycled according to local regulations
PC3629 Coaxlink CXP-12 to QSFP+ Converter
PC1660 1.8 m IEC Power Cable (EUR)
PC1661 6 ft IEC Power Cable (US)
PC1662 6 ft IEC Power Cable (UK)
PC1676 24V 160W Power Supply Block
Coaxlink_NetApi.dll assembly targets: