Coaxlink Quad CXP-3 - Euresys

CXP-3 전용 4-연결부 CoaXPress 프레임 그래버

4개의 CoaXPress CXP-3 연결부: 초당 1,250MB 카메라 대역폭

하나의 카드에 카메라 4대 연결 가능

카메라 케이블 최대 100미터 지원

PCIe 2.0(Gen 2) x4 버스: 공급 대역폭 1,700 MB/s

폭넓은 카메라 제어 기능

Memento 이벤트 로깅 도구

데이터시트

비교 구매처 안내

Coaxlink Quad CXP-3

© EURESYS S.A. - Subject to change without notice


8/14/2024 Datasheet Coaxlink Quad CXP-3 CXP-3 전용 4-연결부 CoaXPress 프레임 그래버 4개의 CoaXPress CXP-3 연결부: 초당 1,250MB 카메라 대역폭 하나의 카드에 카메라 4대 연결 가능 카메라 케이블 최대 100미터 지원 PCIe 2.0(Gen 2) x4 버스: 공급 대역폭 1,700 MB/s 폭넓은 카메라 제어 기능 Memento 이벤트 로깅 도구 Main benefits Other benefits 사양 Mechanical Form factor PCI Express card Format Standard profile, half length, 4-lane PCI Express card Cooling method Air cooling, fan-cooled heatsink Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot Connectors 'A', 'B', 'C', 'D' on bracket: 4x DIN 1.0/2.3 female connectors CoaXPress host interface 'EXTERNAL I/O' on bracket: 26-pin 3-row high-density female sub-D connector I/O lines and power output 'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB: 2x 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and power output 'AUXILIARY POWER INPUT' on module: 6-pin PEG power socket 12 VDC power input for PoCXP camera(s) and I/O power 'C2C-LINK' on module: 6-pin 2-row 0.1-in header Card to card link LED indicators 'A', 'B', 'C', 'D' on bracket: Bi-color red/green LEDs CoaXPress Host connector indicator 'FPGA STATUS LAMP' on PCB: Bi-color red/green LED FPGA status indicator 'BOARD STATUS LAMP' on PCB: Bi-color red/green LED Board status indicator Switches 'RECOVERY' on PCB: 3-pin 1-row 0.1" header or 2-way DIP switch Firmware emergency recovery Dimensions PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in Weight 170 g, 6.00 oz Host bus Standard PCI Express 2.0 Link width 4 lanes 1 lane or 2 lanes with reduced performance Link speed 5.0 GT/s (PCIe 2.0) 2.5 GT/s (PCIe 1.0) with reduced performance Maximum payload size 512 bytes DMA 32- and 64-bit Peak delivery bandwidth 2,000 MB/s Effective (sustained) delivery bandwidth 1,700 MB/s (Host PC motherboard dependent) Power consumption Typ. 12.1W ( 2.5 W @ +3.3V, 9.6 W @ +12V), excluding camera and I/O power output Camera / video inputs Camera interface standard CoaXPress Interface standard(s) CoaXPress 1.0, 1.1, 1.1.1, 2.0 and 2.1 Maximum link speed CXP-3 Maximum link width 4 connections Camera powering PoCXP Connectors Four DIN1.0/2.3 75 Ohms CXP-3 Status LEDs One CoaXPress Host connection status LED per connection Number of cameras Up to four 1-connection cameras Maximum number of cameras 2 Maximum aggregated camera data transfer rate 12.5 Gbps (1,250 MB/s) Supported CXP down-connection speeds 1.25 Gbps (CXP-1), 2.5 Gbps (CXP-2), 3.125 Gbps (CXP-3) Number of CXP data streams (per camera) 1 data stream per camera Maximum CXP stream packet size 8,192 bytes PoCXP (Power over CoaXPress) PoCXP Safe Power: 17 W of 24V DC regulated power per CoaXPress connector PoCXP Device detection and automatic power-on Overload and short-circuit protections On-board 12V to 24V DC/DC converter A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable Camera types Grayscale Color (RGB and Bayer CFA) Camera pixel formats supported Mono8, Mono10, Mono12, Mono14, Mono16 BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX = GR, RG, GB, or BG RGB8, RGB10, RGB12, RGB14, RGB16 RGBA8, RGBA10, RGBA12, RGBA14, RGBA16 YCbCr601_422_8, YCbCr601_422_10 YCbCr709_422_8, YCbCr709_422_10 YUV422_8, YUV422_10 Raw Area-scan camera control Trigger Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation. Strobe Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses. On-board processing On-board memory 1 GB Image data stream processing Unpacking of 10-/12-/14-bit to 16-bit with selectable justification to LSb or MSb Optional swap of R and B components Little endian conversion Data stream statistics Measurement of: Frame rate (Area-scan only) Line rate Data rate Configurable averaging interval Event signaling and counting The application software can be notified of the occurrence of various events: Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers A large set of custom events Custom events sources: I/O Toolbox events Camera and Illumination control events CoaXPress data stream events CoaXPress host interface events Each custom event is associated with a 32-bit counter that counts the number of occurrences The last three 32-bit context data words of the event context data can be configured with event-specific context data: Event-specific data State of all System I/O lines sampled at the event occurrence time Value of any event counter General Purpose Inputs and Outputs Number of lines 20 I/O lines: 4 differential inputs (DIN) 4 singled-ended TTL inputs/outputs (TTLIO) 8 isolated inputs (IIN) 4 isolated outputs (IOUT) Usage Any I/O input lines can be used by any LIN tool of the I/O Toolbox Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder Electrical specifications DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers IOUT: Isolated contact outputs compatible with 30V / 100mA loads NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock! Filter control Glitch removal filter available on all System I/O input lines Configurable filter delay: Custom value Fixed values for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs Fixed values for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs Polarity control Yes Power output Non-isolated, +12V, 1A, with electronic fuse protection I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers) from input lines. The composition of the toolset is product- and firmware-dependent. Line Input tool (LIN): Edge detector delivering events on rising or falling edges of any selected input line. Quadrature Decoder tool (QDC): A composite tool including: A quadrature edge detector delivering events on selected transitions of selected pairs of input lines. An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable. A 32-bit up/down counter for delivering a position value. Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source. Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events). I/O Toolbox composition 8 LIN, 1 QDC, 1 DIV, 1 DEL C2C-Link Description Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras. Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras. Specification C2C-Link synchronizes cameras connected to: the same card to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable) to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one) Maximum distance: 120 cm inside a PC 1200 m cumulated adapter to adapter cable length Maximum trigger rate: 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length Trigger propagation delay from master to slave devices: Less than 10 ns for cameras on the same card or on different cards in the same PC Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length) Software Host PC Operating System Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures APIs EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher GenICam GenTL producer libraries compatible with C/C++ compilers: 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications Supported Memento event categories Yes Environmental conditions Operating ambient air temperature 0 °C to +55 °C / +32 °F to +131 °F Operating ambient air humidity 10% to 90% RH non-condensing Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F Storage ambient air humidity 10% to 90% RH non-condensing Certifications EMC standards European Council EMC Directive 2014/30/EU United States FCC rule 47 CFR 15 EMC - Emission EN 55032:2015 / CISPR 32:2012 Class B FCC 47 Part 15 Class B EMC - Immunity EN 55035:2017 / CISPR 35:2016 EN 61000-6-2:2005 / IEC 61000-6-2:2016 EN 61000-4-2:2009 EN 61000-4-3:2006 EN 61000-4-4:2004 EN 61000-4-6:2014 KC Certification Korean Radio Waves Act, Article 58-2, Clause 3 Flammability PCB compliant with UL 94 V-0 RoHS European Union Directive 2015/863 (ROHS3) REACH European Union Regulation 1907/2006 WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations Ordering Information Product code - Description PC1638 Coaxlink Quad CXP-3 Related products PC1625 DB25F I/O Adapter Cable PC1636 InterPC C2C-Link Adapter PC3303 C2C-Link Ribbon Cable PC3304 HD26F I/O Adapter Cable Offices 유럽, 중동 및 아프리카 Euresys SA Contact support : [email protected] Sensor to Image GMBH Contact support : [email protected] 중국 Euresys Shanghai Liaison Office Contact support : [email protected] Euresys Shenzhen Liaison Office Contact support : [email protected] 일본 Euresys Japan K.K. Contact support : Support [email protected] 한국 Euresys 한국 연락사무소 Contact support : [email protected] 아시아(기타 국가) Euresys Pte. Ltd. Contact support : [email protected] 북, 중남미 Euresys Inc. Contact support : [email protected]

Coaxlink Quad CXP-3