Coaxlink Quad CXP-12 JPEG - Euresys

四路 CoaXPress CXP-12 图像采集卡，带 JPEG 压缩

四路 250M 像素/s 的 JPEG 编码器

兼容 8 位/像素 Bayer CFA 相机

每个相机有两种视频流：JPEG 流和 RGB 预览流

四路CoaXPress CXP-12连接：相机带宽5,000 MB/s

PCIe 3.0 (Gen 3) x8 总线：总线带宽6,700 MB/s

Memento 事件记录工具

比较购买地点

© EURESYS S.A. - Subject to change without notice


8/14/2024 Datasheet Coaxlink Quad CXP-12 JPEG 四路 CoaXPress CXP-12 图像采集卡，带 JPEG 压缩四路 250M 像素/s 的 JPEG 编码器兼容 8 位/像素 Bayer CFA 相机每个相机有两种视频流：JPEG 流和 RGB 预览流四路CoaXPress CXP-12连接：相机带宽5,000 MB/s PCIe 3.0 (Gen 3) x8 总线：总线带宽6,700 MB/s Memento 事件记录工具 Main benefits Other benefits 规格 Mechanical Form factor PCI Express card Format Standard profile, half length, 8-lane PCI Express card Cooling method Air cooling, fan-cooled heatsink Mounting For insertion in a standard height, 8-lane or higher, PCI Express card slot Connectors 'A B C D' on card bracket: 4 x Micro-BNC 75 Ohms coaxial receptacles CoaXPress Host Interface 'EXTERNAL I/O' on card bracket: 26-pin 3-row high-density D-Sub female socket with UNC4-40 jack socket screws I/O lines and I/O power output 'INTERNAL I/O 1' on printed circuit board: 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and I/O power output 'INTERNAL I/O 2' on printed circuit board: 26-pin 2-row 0.1" pitch pin header with shrouding I/O lines and I/O power output 'I/O EXTENSION' on printed circuit board: 26-pin 2-row 0.05" pitch pin header with shrouding I/O extension cable socket 'C2C-LINK' on printed circuit board: 6-pin 2-row 0.1" pitch pin header with shrouding Card-to-card link 'AUXILIARY POWER INPUT' on printed circuit board: 6-pin PEG power socket 12 V DC power input for PoCXP and I/O power output LED indicators 'A', 'B', 'C', 'D' on bracket: Bi-color red/green LEDs CoaXPress Host connector indicator 'FPGA STATUS LAMP' on PCB: Bi-color red/green LED FPGA status indicator 'BOARD STATUS LAMP' on PCB: Bi-color red/green LED Board status indicator Switches 'RECOVERY' on PCB: 3-pin 1-row 0.1" header or 2-way DIP switch Firmware emergency recovery Dimensions PCB L x H: 167.65 mm x 111.15 mm [6.6 in x 4.38 in] Weight Net weight: 196 g [6.9 oz] Gross weight: 297 g [10.5 oz] Host bus Standard PCI Express 3.0 Link width 8 lanes 1 lane, 2 lanes or 4 lanes with reduced performance Link speed 8.0 GT/s (PCIe 3.0) 5.0 GT/s (PCIe 2.0) with reduced performance Maximum payload size 512 bytes DMA 32- and 64-bit Peak delivery bandwidth 7,800 MB/s Effective (sustained) delivery bandwidth 6,700 MB/s (Host PC motherboard dependent) Power consumption Typ. 18.1 W (6.3 W @ +3.3V, 11.8 W @ +12V), excluding camera and I/O power output Camera / video inputs Camera interface standard CoaXPress Interface standard(s) CoaXPress 1.0, 1.1, 1.1.1 and 2.0 Maximum link speed CXP-12 Maximum link width 4 connections Camera powering PoCXP Connectors Four micro-BNC 75 Ohms (also known as HD-BNC™) CXP-12 Status LEDs One CoaXPress Host connection status LED per connection Number of cameras Four 1-connection area-scan cameras Maximum number of cameras 4 Maximum aggregated camera data transfer rate 50 Gbit/s (5,000 MB/s) Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), 6.25 GT/s (CXP-6), 10.0 GT/s (CXP-10), and 12.5 GT/s (CXP-12) Supported CXP up-connection speeds Low-speed 20.83... Mbps (CXP-1 to CXP-6) Low-speed 41.66... Mbps (CXP-10, CXP-12) Number of CXP data streams (per camera) 1 data stream per camera Maximum CXP stream packet size 16,384 bytes PoCXP (Power over CoaXPress) PoCXP Safe Power: 17 W of 24V DC regulated power per CoaXPress connector PoCXP Device detection and automatic power-on Overload and short-circuit protections On-board 12V to 24V DC/DC converter A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable Camera types Area-scan cameras: 8-bit Bayer CFA single-tap (1X-1Y) progressive-scan Image resolution (H x V): from 128 x 16 up to 5120 x 3840; width and height must be multiples of 8 Camera pixel formats supported BayerGR8, BayerRG8, BayerGB8, BayerBG8 Area-scan camera control Trigger Precise control of asynchronous reset cameras, with exposure control. Support of camera exposure/readout overlap. Support of external hardware trigger, with optional delay and trigger decimation. Strobe Accurate control of the strobe position for strobed light sources. Support of early and late strobe pulses. On-board processing On-board memory 4 GB Image data stream processing Optional swap of R and B components 1:8 image downscaling available on RGB8 output (Stream0, a.k.a. "preview stream") Bayer CFA to RGB decoder 3x3 median-based interpolation method on '4-camera' firmware variant - Data stream statistics Measurement of: Frame rate (Area-scan only) Line rate Data rate Configurable averaging interval Event signaling and counting The application software can be notified of the occurrence of various events: Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers A large set of custom events Custom events sources: I/O Toolbox events Camera and Illumination control events CoaXPress data stream events CoaXPress host interface events Each custom event is associated with a 32-bit counter that counts the number of occurrences The last three 32-bit context data words of the event context data can be configured with event-specific context data: Event-specific data State of all System I/O lines sampled at the event occurrence time Value of any event counter On-board video codec On-board video compression Yes Video encoders JPEG Baseline profile 4 encoders Up to 250 Mpixels/second per encoder JFIF compliant output General Purpose Inputs and Outputs Number of lines 20 I/O lines: 4 differential inputs (DIN) 4 singled-ended TTL inputs/outputs (TTLIO) 8 isolated inputs (IIN) 4 isolated outputs (IOUT) NOTE: The number of I/O lines can be extended using I/O modules attached to the I/O EXTENSION connector. Usage Any I/O input lines can be used by any LIN tool of the I/O Toolbox Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder Electrical specifications DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers IOUT: Isolated contact outputs compatible with 30V / 100mA loads NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock! Filter control Glitch removal filter available on all System I/O input lines Configurable filter time constants: for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs Polarity control Yes Power output Non-isolated, +12V, 1A, with electronic fuse protection I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers): Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line. Quadrature Decoder tool (QDC): a composite tool including: A quadrature edge detector delivering events on selected transitions of selected pairs of input lines. An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable. A 32-bit up/down counter for delivering a position value. Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device. User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events. Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events). Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source. Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source. The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events: The "cycle trigger" of the Camera and Illumination controller The "cycle sequence trigger" of the Camera and Illumination controller The "start-of-scan trigger" of the Acquisition Controller (line-scan only) The "end-of-scan trigger" of the Acquisition Controller (line-scan only) I/O Toolbox composition 8 LIN, 4 QDC, 8 DLT, 1 UAS, 4 DEL, 4 DIV, 4 MDV, 2 C2C C2C-Link Description Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras. Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras. Specification C2C-Link synchronizes cameras connected to: the same card to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable) to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one) Maximum distance: 60 cm inside a PC 1200 m cumulated adapter to adapter cable length Maximum trigger rate: 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length Trigger propagation delay from master to slave devices: Less than 10 ns for cameras on the same card or on different cards in the same PC Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length) Software Host PC Operating System Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures APIs EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher GenICam GenTL producer libraries compatible with C/C++ compilers: 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications Supported Memento event categories Yes Environmental conditions Operating ambient air temperature 0 °C to +55 °C / +32 °F to +131 °F Operating ambient air humidity 10% to 90% RH non-condensing Storage ambient air temperature -20 °C to +70 °C/ -4 °F to +158 °F Storage ambient air humidity 10% to 90% RH non-condensing Certifications Electromagnetic - EMC standards European Council EMC Directive 2014/30/EU United States FCC rule 47 CFR 15 EMC - Emission EN 55032:2015 / CISPR 32:2012 Class B FCC 47 Part 15 Class B EMC - Immunity EN 55024:2010 / CISPR 24:2010 EN 55035:2017 / CISPR 35:2016 EN 61000-4-2:2009 EN 61000-4-3:2006 EN 61000-4-4:2004 EN 61000-4-6:2014 KC Certification Korean Radio Waves Act, Article 58-2, Clause 3 Flammability PCB compliant with UL 94 V-0 RoHS European Union Directive 2015/863 (ROHS3) REACH European Union Regulation 1907/2006 WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations Ordering Information Product code - Description PC3620-4 Coaxlink Quad CXP-12 JPEG Related products PC1625 DB25F I/O Adapter Cable PC1636 InterPC C2C-Link Adapter PC3303 C2C-Link Ribbon Cable PC3304 HD26F I/O Adapter Cable PC3610 HD26F I/O Extension Module - TTL-RS422 PC3612 HD26F I/O Extension Module - TTL-CMOS5V-RS422 PC3617 HD26F I/O Extension Module - TTL-CMOS5V Offices 欧洲、中东和非洲 Euresys SA Contact support : [email protected] Sensor to Image GMBH Contact support : [email protected] 中国 Euresys 上海联络处 Contact support : [email protected] Euresys 深圳联络处 Contact support : [email protected] 日本 Euresys日本K.K. Contact support : Support [email protected] 韩国 Euresys 韩国联络处 Contact support : [email protected] 亚洲（其他国家/地区） Euresys Pte. Ltd. Contact support : [email protected] 北美、中美和南美 Euresys Inc. Contact support : [email protected]

Coaxlink Quad CXP-12 JPEG