Learn more about our product features:
Logo-Memento.png Logo-Genicam.png C2C-Link.png
 

Coaxlink Quad 3D-LLE

Quad CXP-6 Framegrabber mit On-Board Laserlinien-Extraktion für 3D-Profiling

Im Überblick
  • Laserlinien-Extraktion ohne CPU-Nutzung des Hosts
  • Extraktion von Einzel- und Doppellaserlinien in eine Tiefenkarte
  • Echtzeitgenerierung von 16-Bit-Höhenprofilen in 3D
  • Auswahl an Algorithmen: Maximum, Peak, Center of Gravity (COG)
  • Genauigkeit: bis zu 1/256 Pixel (mit den Algorithmen Peak und COG)
  • Leistung: 19.000 Profile/s von 1024 x 128 Bildern. 38.000 Profile/s von 1024 x 64 Bildern
  • Memento Event-Logging-Tool



Vergleichen Händler


Laserlinien-Extraktion ohne CPU-Nutzung des Hosts
Laserlinien-Extraktion ohne CPU-Nutzung des Hosts

Der in der Coaxlink integrierte FPGA misst die Position der Laserlinie während der Bilderfassung, ohne die Host-CPU zu laden.


Stromversorgung über CoaXPress
Stromversorgung über CoaXPress

  • Stromversorgung über CoaXPress: Versorgen Sie Ihre Kamera mit bis zu 17 W pro Kanal bei 24 VDC mit automatischer Geräteerkennung, Messungen und Überlastschutz.
  • Spannung und Strom können insgesamt und pro Kanal gemessen werden, wodurch eine Validierung und Überwachung von Leistungsabweichungen möglich sind.


Verwendung von Standard-Koaxialkabeln
Verwendung von Standard-Koaxialkabeln

  • Ein einziges, preiswertes Kabel für Datenübertragung, Kamerasteuerung, Auslöser und Stromversorgung
  • Hohe Zuverlässigkeit und Flexibilität, einsatzbereit in den härtesten Umgebungen


Universelle I/O-Leitungen
Universelle I/O-Leitungen

  • Kompatibel mit einer breiten Palette an Sensoren und Bewegungsencodern.
  • Highspeed-Differenzeingänge: Quadratur-Bewegungsencoder unterstützt bis zu 5 MHz.
  • Galvanisch getrennte Strommesseingänge: 5 V, 12 V, 24 V Signalspannungen akzeptiert, bis zu 50 kHz, einzeln galvanisch getrennt bis 250 VDC und 170 VAC RMS.
  • Galvanisch getrennte Kontaktausgänge.
  • 5V-konforme Highspeed-TTL-Eingänge/ LVTTL-Ausgänge.


Windows-, Linux- und Mac OS-Treiber verfügbar
Windows-, Linux- und Mac OS-Treiber verfügbar

  • Einschließlich Unterstützung für Intel 64-Bit-Plattformen sowie ARM 64-Bit-Plattformen


Echtzeitgenerierung von 16-Bit-Höhenprofilen in 3D
Echtzeitgenerierung von 16-Bit-Höhenprofilen in 3D

Die Coaxlink überträgt die berechneten 3D-Höhenprofile direkt und ohne Verzögerung in Echtzeit an den Speicher des Host-PC.


Extraktion von Doppellaserlinien
Extraktion von Doppellaserlinien

Der duale Laserlinien-Extraktionsprozess wird von Software- und Hardware-Implementierungen unterstützt und reduziert den Effekt von Okklusionen. Okklusionen treten auf, wenn einige Teile der Objekte nicht von einem Laser beleuchtet werden. Die Verwendung von zwei Lasern mit verschiedenen Winkeln reduziert diese undefinierten Bereiche. Dank der in Easy3DLaserLine enthaltenen objektbasierten Kalibrierung können die erfassten Daten in einer einzigen kalibrierten Punktewolke kombiniert werden.


Robuste Steckverbinder für zuverlässige Anschlüsse
Robuste Steckverbinder für zuverlässige Anschlüsse

  • Coaxlink CXP-6 verwendet DIN 1.0/2.3-Steckverbinder mit Push/Pull-Verriegelungssystem


High-Performance DMA (Direct Memory Access)
High-Performance DMA (Direct Memory Access)

  • Direkte Übertragung an vom Benutzer zugewiesene Arbeitsspeicher- und Hardwarekarten, die PCI-Adressen bereitstellen
  • Hardware Scatter-Gather-Unterstützung
  • 64-Bit-Adressierungsfähigkeit


Kompatibel mit <a target="_blank" href="https://www.euresys.com/en/Products/Machine-Vision-Software/eGrabber"target="_blank">eGrabber</A>
Kompatibel mit eGrabber


Entwickelt mit Unterstützung der technologischen Entwicklungsabteilung DG06
Entwickelt mit Unterstützung der technologischen Entwicklungsabteilung DG06


Bilderfassung von den schnellsten und höchstauflösenden Kameras
Bilderfassung von den schnellsten und höchstauflösenden Kameras

  • Höchste Datenerfassungsrate der Branche
  • 25 Gbit/s (2.500 MB/s) Bandbreite von Kamera zu Host-PC-Speicher


Unterstützung langer Kabel
Unterstützung langer Kabel

  • 40 Meter bei CXP-6-Geschwindigkeit (6,25 Gbit/s)
  • 100 Meter bei CXP-3-Geschwindigkeit (3 Gbit/s)


Memento Event-Logging-Tool

  • Memento ist ein fortschrittliches Entwicklungs- und Debugging-Tool, das für Coaxlink- und Grablink-Karten verfügbar ist.
  • Memento zeichnet genaue Protokolle aller mit der Kamera, dem Framegrabber und seinen zugehörigen Treibern sowie der Anwendung im Zusammenhang stehenden Ereignisse auf.
  • Es liefert Entwicklern eine präzise Zeitachse der zeitgestempelten Ereignisse mit Kontextinformationen einer Logikanalysatoransicht.
  • Es bietet wertvolle Hilfe bei der Anwendungsentwicklung und beim Debuggen sowie während des Maschinenbetriebs.


Trigger-Fähigkeiten für Flächenscans

  • Wenn sich das Teil in seiner Position befindet, wird die Erfassung mithilfe eines Triggers ausgelöst. Hardware-Trigger kommen von den Coaxlink I/O-Leitungen. Software-Trigger kommen von der Anwendung.
  • Eine optionale Triggerverzögerung ist verfügbar, um die Erfassung entsprechend einer programmierbaren Zeit zu verschieben.
  • Eine Funktion zur Dezimierung von Triggern ermöglicht das Überspringen einiger Trigger.
  • Mit der Belichtungssteuerung der Kamera kann die Anwendung die Belichtungszeit der Kamera steuern.
  • Nach Beginn der Erfassung generiert die Coaxlink-Karte zum entsprechenden Zeitpunkt ein Signal, das ein an die Ausgangsleitung angeschlossenes Beleuchtungsgerät steuert.


Kompatibel mit Genicam
Kompatibel mit Genicam

Umfasst Support für

  • GenApi
  • Die Standard Feature Naming Convention (SFNC)
  • GenTL


Mechanical
Format Standard profile, half length, 4-lane PCI Express card
Cooling method Air cooling, fan-cooled heatsink
Mounting For insertion in a standard height, 4-lane or higher, PCI Express card slot
Connectors
  • 'A', 'B', 'C', 'D' on bracket:
    • 4x DIN 1.0/2.3 female connectors
    • CoaXPress host interface
  • 'EXTERNAL I/O' on bracket:
    • 26-pin 3-row high-density female sub-D connector
    • I/O lines and power output
  • 'INTERNAL I/O 1' and 'INTERNAL I/O 2' on PCB:
    • 2x 26-pin 2-row 0.1" pitch pin header with shrouding
    • I/O lines and power output
  • 'AUXILIARY POWER INPUT' on module:
    • 6-pin PEG power socket
    • 12 VDC power input for PoCXP camera(s) and I/O power
  • 'C2C-LINK' on module:
    • 6-pin 2-row 0.1-in header
    • Card to card link
LED indicators
  • 'A', 'B', 'C', 'D' on bracket:
    • Bi-color red/green LEDs
    • CoaXPress Host connector indicator
  • 'FPGA STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • FPGA status indicator
  • 'BOARD STATUS LAMP' on PCB:
    • Bi-color red/green LED
    • Board status indicator
Switches 'RECOVERY' on PCB:
  • 3-pin 1-row 0.1" header or 2-way DIP switch
  • Firmware emergency recovery
Dimensions PCB L X H: 167.65 mm x 111.15 mm, 6.6 in x 4.38 in
Weight 180 g, 6.35 oz
Host bus
Standard PCI Express 2.0
Link width
  • 4 lanes
  • 1 lane or 2 lanes with reduced performance
Link speed
  • 5.0 GT/s (PCIe 2.0)
  • 2.5 GT/s (PCIe 1.0) with reduced performance
Maximum payload size 512 bytes
DMA 32- and 64-bit
Peak delivery bandwidth 2,000 MB/s
Effective (sustained) delivery bandwidth 1,700 MB/s (Host PC motherboard dependent)
Power consumption Typ. 16.8 W (3.8 W @ +3.3V, 13 W @ +12V), excluding camera and I/O power output
Camera / video inputs
Interface standard(s) CoaXPress 1.0, 1.1 and 1.1.1
Connectors Four DIN1.0/2.3 75 Ohms CXP-6
Status LEDs One CoaXPress Host connection status LED per connection
Number of cameras One 1- or 2- or 4-connection camera
Maximum aggregated camera data transfer rate 25 Gbit/s (2,500 MB/s)
Supported CXP down-connection speeds 1.25 GT/s (CXP-1), 2.5 GT/s (CXP-2), 3.125 GT/s (CXP-3), 5 GT/s (CXP-5), and 6.25 GT/s (CXP-6)
Number of CXP data streams (per camera) 1 data stream per camera
Maximum CXP stream packet size 16,384 bytes
PoCXP (Power over CoaXPress)
  • PoCXP Safe Power:
    • 17 W of 24V DC regulated power per CoaXPress connector
    • PoCXP Device detection and automatic power-on
    • Overload and short-circuit protections
  • On-board 12V to 24V DC/DC converter
  • A +12V power source must be connected to the AUXILIARY POWER INPUT connector using a 6-pin PEG cable
Camera types Grayscale area-scan cameras
Camera pixel formats supported Mono8
Area-scan camera control
Trigger
  • Precise control of asynchronous reset cameras, with exposure control.
  • Support of camera exposure/readout overlap.
  • Support of external hardware trigger, with optional delay and trigger decimation.
Strobe
  • Accurate control of the strobe position for strobed light sources.
  • Support of early and late strobe pulses.
On-board processing
On-board memory 1 GB
Image data stream processing Laser Line Extraction (LLE) processing core to compute the vertical position of one detected laser line along a ROI using one of the following algorithms:
  • Maximum Detection algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 65536 pixels
    • Depth map format: 16-bit unsigned integer number
    • Accuracy: 1 pixel
  • 8-bit Maximum Detection algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 256 pixels
    • Depth map format: 8-bit unsigned integer number
    • Accuracy: 1 pixel
  • Peak Detection algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 2048 pixels
    • Depth map format: UQ11.5 fixed-point unsigned number
    • Accuracy: 1/32 pixel
  • High accuracy Peak Detection algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 256 pixels
    • Depth map format: UQ8.8 fixed-point unsigned number
    • Accuracy: 1/256 pixel
  • Center Of Gravity algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 2048 pixels
    • Depth map format: UQ11.5 fixed-point unsigned number
    • Accuracy: 1/32 pixel
  • High accuracy Center Of Gravity algorithm
    • Maximum ROI width: 8192 pixels
    • Maximum ROI height: 256 pixels
    • Depth map format: UQ8.8 fixed-point unsigned number
    • Accuracy: 1/256 pixel
Data stream statistics
  • Measurement of:
    • Frame rate (Area-scan only)
    • Line rate
    • Data rate
  • Configurable averaging interval
Event signaling and counting
  • The application software can be notified of the occurrence of various events:
    • Standard event: the EVENT_NEW_BUFFER event notifies the application of newly filled buffers
    • A large set of custom events
  • Custom events sources:
    • I/O Toolbox events
    • Camera and Illumination control events
    • CoaXPress data stream events
    • CoaXPress host interface events
  • Each custom event is associated with a 32-bit counter that counts the number of occurrences
  • The last three 32-bit context data words of the event context data can be configured with event-specific context data:
    • Event-specific data
    • State of all System I/O lines sampled at the event occurrence time
    • Value of any event counter
General Purpose Inputs and Outputs
Number of lines 20 I/O lines:
  • 4 differential inputs (DIN)
  • 4 singled-ended TTL inputs/outputs (TTLIO)
  • 8 isolated inputs (IIN)
  • 4 isolated outputs (IOUT)
Usage
  • Any I/O input lines can be used by any LIN tool of the I/O Toolbox
  • Selected pairs of I/O input lines can be used by any QDC tool of the I/O toolbox to decode A/B signals of a motion encoder
Electrical specifications
  • DIN: High-speed differential inputs, up to 5 MHz, compatible with ANSI/EIA/TIA-422/485 differential line drivers and complementary TTL drivers
  • TTLIO: High-speed 5V-compliant TTL inputs or LVTTL outputs, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers or LVTTL, TTL, 3V CMOS receivers
  • IIN: Isolated current-sense inputs with wide voltage input range up to 30V, compatible with totem-pole LVTTL, TTL, 5V CMOS drivers, RS-422 differential line drivers, potential free contacts, solid-state relays and opto-couplers
  • IOUT: Isolated contact outputs compatible with 30V / 100mA loads
NOTE: IIN and IOUT lines provide a functional isolation grade for the circuit technical protection. It does not provide an isolation that can protect a human being from electrical shock!
Filter control
  • Glitch removal filter available on all System I/O input lines
  • Configurable filter time constants:
    • for DIN and TTLIO lines: 50 ns, 100 ns, 200 ns, 500 ns, 1 µs
    • for IIN lines: 500 ns, 1 µs, 2 µs, 5 µs, 10 µs
Polarity control Yes
Power output Non-isolated, +12V, 1A, with electronic fuse protection
I/O Toolbox tools The I/O Toolbox is a configurable interconnection of tools that generates events (usually triggers):
  • Line Input tool (LIN): edge detector delivering events on rising or falling edges of any selected input line.
  • Quadrature Decoder tool (QDC): a composite tool including:
    • A quadrature edge detector delivering events on selected transitions of selected pairs of input lines.
    • An optional backward motion compensator for clean line-scan image acquisition when the motion is unstable.
    • A 32-bit up/down counter for delivering a position value.
  • Device Link Trigger tool (DLT): delivers an event on reception of a valid high-speed CoaXPress 2.0 connection trigger packet message from the remote device.
  • User Actions Scheduler tool (UAS): to delegate the execution of 'User Actions' at a scheduled time or encoder position. Possible user actions include setting low/high/toggle any bit of the User Output Register or generation of any User Events.
  • Delay tool (DEL): to delay up to 16 events from one or two I/O toolbox event sources, by a programmable time or number of motion encoder ticks (any QDC events).
  • Divider tool (DIV): to generate an event every nth input events from any I/O toolbox event source.
  • Multiplier/divider tool (MDV): to generate m events every d input events from any I/O toolbox event source.
  • The 'Input Tools' (LIN, QDC, DLT and UAS) can be further processed by the 'Event Tools' (DEL, DIV and MDV) to generate any of the following "trigger" events:
    • The "cycle trigger" of the Camera and Illumination controller
    • The "cycle sequence trigger" of the Camera and Illumination controller
    • The "start-of-scan trigger" of the Acquisition Controller (line-scan only)
    • The "end-of-scan trigger" of the Acquisition Controller (line-scan only)
I/O Toolbox composition 8 LIN, 1 QDC, 1 UAS, 2 DEL, 1 DIV, 1 MDV, 2 C2C
C2C-Link
Description
  • Accurate synchronization of the trigger and the start-of-exposure of multiple grabber-controlled area-scan cameras.
  • Accurate synchronization of the start-of-cycle, start-of-scan and end-of-scan of multiple grabber-controlled line-scan cameras.
Specification
  • C2C-Link synchronizes cameras connected to:
    • the same card
    • to different cards in the same PC (requires an accessory cable such as the "3303 C2C-Link Ribbon Cable" or a custom-made C2C-Link cable)
    • to different cards in different PCs (requires one "1636 InterPC C2C-Link Adapter" for each PC and one RJ 45 CAT 5 STP straight LAN cable for each adapter but the last one)
  • Maximum distance:
    • 60 cm inside a PC
    • 1200 m cumulated adapter to adapter cable length
  • Maximum trigger rate:
    • 2.5 MHz for configurations using a single PC, or up to 10 PCs and 100 m total C2C-Link cable length
    • 200 kHz for configurations up to 32 PCs and 1200m total C2C-Link cable length
  • Trigger propagation delay from master to slave devices:
    • Less than 10 ns for cameras on the same card or on different cards in the same PC
    • Less than 265 ns for cameras on different cards in different PCs (3 PCs and 40m total C2C-Link cable length)
Software
Host PC Operating System
  • Microsoft Windows 11, 10, 8.1, 7 for x86-64 (64-bit) processor architecture
  • Linux for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
  • macOS for x86-64 (64-bit) and AArch64 (64-bit) processor architectures
APIs
  • EGrabber class, with C++ and .NET APIs: .NET assembly designed to be used with development environments compatible with .NET frameworks version 4.0 or higher
  • GenICam GenTL producer libraries compatible with C/C++ compilers:
    • 'x86_64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of x86-64 (64-bit) applications
    • 'aarch64' dynamic library designed to be used with ISO-compliant C/C++ compilers for the development of AArch64 (64-bit) applications
Environmental conditions
Operating ambient air temperature 0 to +55 °C / +32 to +131 °F
Operating ambient air humidity 10 to 90% RH non-condensing
Storage ambient air temperature -20 to +70 °C/ -4 to +158 °F
Storage ambient air humidity 10% to 90% RH non-condensing
Certifications
Electromagnetic - EMC standards
  • European Council EMC Directive 2014/30/EU
  • United States FCC rule 47 CFR 15
EMC - Emission
  • EN 55032:2015 / CISPR 32:2012 Class B
  • FCC 47 Part 15 Class B
EMC - Immunity
  • EN 55024:2010 / CISPR 24:2010
  • EN 61000-4-2:2009
  • EN 61000-4-3:2006
  • EN 61000-4-4:2004
  • EN 61000-4-6:2014
KC Certification Korean Radio Waves Act, Article 58-2, Clause 3
Flammability PCB compliant with UL 94 V-0
RoHS European Union Directive 2015/863 (ROHS3)
REACH European Union Regulation 1907/2006
WEEE Must be disposed of separately from normal household waste and must be recycled according to local regulations
Ordering Information
Product code - Description
Optional accessories
3D Acquisition Elec

3D-Bilderfassung für elektronische Inspektionssysteme

Zugehörige Produkte
Coaxlink Quad 3D-LLE
3D Acquisition Man

3D-Bilderfassung für Inspektionssysteme

Zugehörige Produkte
Coaxlink Quad 3D-LLE